NI PXI-6255多功能數據采集模塊
1.產 品 資 料 介 紹：
中文資料：
NI PXI-6255是National Instruments（NI）推出的一款多功能數據采集模塊。以下是對其產品特點、使用方法和參數的詳細介紹：
產品特點：
- 多通道：PXI-6255具有16個模擬輸入通道和2個模擬輸出通道，可同時進行多通道的數據采集和輸出。
- 高精度：模擬輸入通道具有16位分辨率，可提供高精度的數據采集和測量。
- 多功能：PXI-6255支持模擬輸入和輸出、數字I/O、計數器/定時器等多種功能，適用于各種應用需求。
- 高速采樣：最大采樣率可達1.25 MS/s，使其適用于高速數據采集應用。
- 靈活性：具備可編程增益和可編程輸入電壓量程，可根據實際需求進行配置。
- PXI標準：采用PXI總線接口，可與其他PXI模塊進行靈活的組合和擴展。
使用方法：
- 硬件連接：將PXI-6255插入PXI底座中，并連接所需的傳感器或信號源到模擬輸入通道或模擬輸出通道。
- 驅動程序安裝：安裝NI提供的驅動程序和開發環境，如NI-DAQmx等。
- 配置和編程：使用NI-DAQmx提供的API和函數，對PXI-6255進行配置和編程，以實現數據采集、輸出和控制等功能。
參數詳情（部分參數）：
- 模擬輸入通道：16個單端或8個差分輸入通道
- 模擬輸出通道：2個通道
- 模擬輸入分辨率：16位
- 最大采樣率：1.25 MS/s
- 可編程增益：±0.2 V至±10 V
- 可編程輸入電壓量程：±200 mV至±10 V
- 數字I/O通道：8個輸入/輸出通道
- 計數器/定時器：2個32位計數器/定時器
- 接口類型：PXI總線接口
- 支持的開發環境：LabVIEW、C/C++、C#、Visual Basic等
英文資料：
NI PXI-6255 is a multifunctional data collection module launched by National Instruments (NI). The following is a detailed introduction to its product features, usage methods, and parameters:
Product features:
Multi channel: PXI-6255 has 16 analog input channels and 2 analog output channels, allowing for simultaneous multi-channel data acquisition and output.
High precision: The analog input channel has a 16 bit resolution, providing high-precision data acquisition and measurement.
Multifunctional: PXI-6255 supports various functions such as analog input and output, digital I/O, counters/timers, and is suitable for various application requirements.
High speed sampling: The maximum sampling rate can reach 1.25 MS/s, making it suitable for high-speed data collection applications.
Flexibility: With programmable gain and programmable input voltage range, it can be configured according to actual needs.
PXI standard: Adopting PXI bus interface, it can be flexibly combined and expanded with other PXI modules.
usage method:
Hardware connection: Insert PXI-6255 into the PXI base and connect the required sensor or signal source to the analog input channel or analog output channel.
Driver installation: Install drivers and development environments provided by NI, such as NI-DAQmx.
Configuration and programming: Use the API and functions provided by NI-DAQmx to configure and program PXI-6255 to achieve functions such as data collection, output, and control.
Parameter details (some parameters):
Analog input channels: 16 single ended or 8 differential input channels
Analog output channels: 2 channels
Analog input resolution: 16 bits
Maximum sampling rate: 1.25 MS/s
Programmable gain: ± 0.2 V to ± 10 V
Programmable input voltage range: ± 200 mV to ± 10 V
Digital I/O channels: 8 input/output channels
Counter/Timer: 2 32-bit counters/timers
Interface type: PXI bus interface
Supported development environments: LabVIEW, C/C++, C #, Visual Basic, etc
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.215pk.com
