NI PXI-6711控制模塊數據采集
1.產 品 資 料 介 紹：
中文資料：
NI PXI-6711是一款多功能數據采集和控制模塊，由National Instruments（NI）公司生產。下面是關于該模塊的產品特點、使用方法和參數詳情的介紹：
NI PXI-6711產品特點：
- 多功能性：NI PXI-6711模塊集成了模擬輸入、模擬輸出、數字輸入和數字輸出功能，可用于數據采集、信號生成、測量和控制等應用。
- 高精度：NI PXI-6711模塊具有16位分辨率的模擬輸入和輸出，可以實現精確的信號采集和生成。
- 高速性能：NI PXI-6711模塊支持高達1.25 MS/s的模擬輸入和輸出速度，可滿足對快速信號進行采集和生成的需求。
- 多通道：NI PXI-6711模塊提供了多個模擬輸入通道和模擬輸出通道，使得可以同時采集和生成多個信號。
- 靈活性：模塊支持多種觸發模式和計時模式，可根據應用需求進行配置。
- 兼容性：模塊采用PXI總線接口，可以與其他PXI模塊和設備進行連接和協同工作。
使用方法：
- 硬件安裝：將NI PXI-6711模塊插入PXI機箱的合適插槽中，并確保連接好所需的信號輸入和輸出接口。
- 驅動安裝：在計算機上安裝NI-DAQmx驅動軟件，該驅動提供了與NI PXI-6711模塊進行通信的API函數。
- 軟件編程：使用支持NI-DAQmx的編程環境（如LabVIEW、C/C++、Python等），編寫相應的程序代碼來配置模塊、進行數據采集和生成、控制和分析等操作。
NI PXI-6711參數詳情：
- 模擬輸入通道：8個差分或16個單端通道
- 模擬輸出通道：2個差分或4個單端通道
- 模擬輸入分辨率：16位
- 模擬輸出分辨率：16位
- 模擬輸入速度：最高1.25 MS/s
- 模擬輸出速度：最高1.25 MS/s
- 數字輸入通道：8個
- 數字輸出通道：8個
- 觸發模式：軟件觸發、數字觸發、模擬觸發等
- 計時模式：?jiǎn)吸c(diǎn)采集、有限點采集、連續采集等
- 接口類型：PXI總線接口
- 驅動軟件：NI-DAQmx
英文資料：
NI PXI-6711 is a multifunctional data acquisition and control module produced by National Instruments (NI). The following is an introduction to the product features, usage methods, and parameter details of this module:
NI PXI-6711 Product Features:
Multifunctionality: The NI PXI-6711 module integrates analog input, analog output, digital input, and digital output functions, which can be used for applications such as data acquisition, signal generation, measurement, and control.
High precision: The NI PXI-6711 module has 16 bit resolution analog input and output, enabling precise signal acquisition and generation.
High speed performance: The NI PXI-6711 module supports analog input and output speeds of up to 1.25 MS/s, meeting the requirements for fast signal acquisition and generation.
Multi channel: The NI PXI-6711 module provides multiple analog input channels and analog output channels, allowing for simultaneous acquisition and generation of multiple signals.
Flexibility: The module supports multiple triggering and timing modes, which can be configured according to application requirements.
Compatibility: The module adopts a PXI bus interface, which can connect and collaborate with other PXI modules and devices.
usage method:
Hardware installation: Insert the NI PXI-6711 module into a suitable slot in the PXI chassis and ensure that the required signal input and output interfaces are connected properly.
Driver installation: Install the NI-DAQmx driver software on the computer, which provides API functions for communication with the NI PXI-6711 module.
Software programming: Using a programming environment that supports NI-DAQmx (such as LabVIEW, C/C++, Python, etc.), write corresponding program code to configure modules, perform data collection and generation, control and analysis, and other operations.
NI PXI-6711 parameter details:
Analog input channels: 8 differential or 16 single ended channels
Analog output channels: 2 differential or 4 single ended channels
Analog input resolution: 16 bits
Analog output resolution: 16 bits
Analog input speed: up to 1.25 MS/s
Analog output speed: up to 1.25 MS/s
Digital input channels: 8
Digital output channels: 8
Trigger mode: software trigger, digital trigger, analog trigger, etc
Timing mode: single point acquisition, limited point acquisition, continuous acquisition, etc
Interface type: PXI bus interface
Driver software: NI-DAQmx
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.215pk.com
