NI PXIe-5673信號發生器
1.產 品 介 紹
品牌：NI
型號：NI PXIe-5673
產品說明：信號發生器
優勢：供應進口原裝正品，專業停產配件。
2.產 品 詳 情 資 料：
NI PXIe-5673規則2：如果90系列CMM從設備位于磚塊的下游，則將CMM串行端口的配置設置為無流量控制，并具有0 ms調制解調器周轉延遲（僅適用于CCM、SNP和SNP-X協議）。規則3：在主機和從設備之間的單個通信路徑中放置的磚塊不得超過三塊。電纜圖以下電纜圖被稱為前面圖中系統配置的電纜a–E。NI PXIe-5673這些圖顯示了構建您自己的電纜的原理，并可根據您的具體應用進行修改。微型轉換器說明微型轉換器套件（NI PXIe-5673由RS-422（SNP）至RS-232微型轉換器、6英尺（2米）的串行延長電纜、，NI PXIe-5673以及9針至25針轉換器插頭組件。Miniconverter上的15針SNP端口連接器直接插入Series 90-30電源、Series 90-70 CPU或Series 90-20 CPU上的串行端口連接器。微型轉換器上的9針RS-232端口連接器連接到RS-232兼容設備。
Rule 2: If a Series 90 CMM slave device is located downstream of a brick, set the configuration of the CMM serial port to NONE flow control with a 0 ms Modem Turnaround Delay (Applies to CCM, SNP, and SNP-X protocols only). Rule 3: NI PXIe-5673Do not place more than three bricks in a single communication path between the host and the slave devices.Cable Diagrams The cable diagrams below are referred to as Cables A–E from the system configurations in the previous figures. These diagrams show the principles for constructing your own cables and can be modified to fit your specific application.Description of Miniconverter The Miniconverter KitNI PXIe-5673 consists of an RS-422 (SNP) to RS-232 Miniconverter, a 6 foot (2 meter) serial extension cable, and a 9-pin to 25-pin Converter Plug assembly.The 15-pin SNP port connector on the Miniconverter plugs directly into the serial port connector on the Series 90-30 power supply, Series 90-70 CPU or Series 90-20 CPU. The 9-pin RS-232 port connector on the Miniconverter connects to an RS-232 compatible device.NI PXIe-5673
3.產 品 展 示
4.公 司 優 勢
5.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.215pk.com
