NI PXI-2586輸入模塊采集器
品牌：NI
型號：NI PXI-2586輸入模塊采集器
產品說明：模塊控制器
NI PXI-2586輸入模塊采集器中文資料：
NI PXI-2586輸入模塊采集器EPROM和EEPROM用戶程序存儲選項311、313、323、331型和341型CPU的早期版本具有用戶PROM選項，用于在非易失性存儲器中存儲用戶應用程序、寄存器數據和配置數據。應用程序通常在CPU的電池支持的RAM存儲器中開發，并從該RAM存儲器中執行。但是如果需要額外的程序完整性或PLC在沒有電池的情況下的操作NI PXI-2586，可選的EEPROM或EPROM可以安裝在嵌入式CPU底板上的備用插槽（標記為PROGRAM PROM）中，也可以安裝在331型CPU模塊內的插槽中（以及硬件版本IC693CPU341-J和固件版本4.61之前的341型CPU早期版本）。331型CPU模塊（以及341型早期版本）旁邊有一個標記為JP1的跳線EEPROM/EPROM插座，允許您選擇EEPROM或EPROM。這些跳線位置如下所示。NI PXI-2586
英文資料
EPROM and EEPROM User Program Storage Options The Model 311, 313, 323, 331, and an earlier version of the Model 341 CPUs have a User PROM option for storing user application programs, register data, and configuration data in non-volatile memory. Application programs are usually developed in a CPU’s battery-backed RAM memory and executed from this RAM memory. But, if additional program integrity, or operation of the PLC without a battery is desired, an optional EEPROM or EPROM can be installed in a spare socket (labeled PROGRAM PROM) on the embedded CPU baseplates or in a socket inside the Model 331 CPU module (and inside the early versions of Model 341 CPU prior to hardware version IC693CPU341-J and firmware release 4.61). The Model 331 CPU module (and the early versions of Model 341) has a jumper labeled JP1 located next to the EEPROM/EPROM socket to allow you to select either EEPROM or EPROM. These jumper positions are shown below.NI PXI-2586
每 日 展 示
公 司 主 營 優 勢
應 用 行 業
