Triconex 3624 數字輸出模塊 PDF資料
1.產 品 資 料 介 紹：
中文資料：
Triconex 3624 是 Tricon 系列中的一款數字輸出模塊，設計用于支持高可靠性、實時響應的工業自動化和安全儀表系統（SIS）。作為關鍵組件，它能夠執行數字信號的輸出控制，確保系統能準確響應和控制過程。
主要技術參數：
輸出類型：
- 數字輸出： 提供穩定的開關輸出，適用于各類設備的控制需求。
- 輸出通道數： 通常為 8 或 16 通道，具體型號可能有所不同。
輸出規格：
- 每個輸出通道通常支持 24 V DC 繼電器輸出或晶體管輸出，能直接驅動負載。
- 具有短路保護、過載保護和過壓保護功能，增強了安全性。
冗余設計：
- 該模塊支持熱插拔冗余設計，確保在發生故障時不會影響系統運行。
- 雙電源輸入： 提供更高的可靠性，避免單電源故障時對系統的影響。
通信協議：
- 通常與 Triconex 系統的主控單元通過高速通信協議連接（如 TCM、Triconex ControlNet 或其他專用網絡），保證高速和可靠的數據交換。
診斷功能：
- 自我診斷： 內建自診斷機制，可實時監控輸出狀態，并在發生故障時通知控制系統。
- 報警機制： 如果模塊輸出出現故障，能及時報告，減少系統停機時間。
環境和電源要求：
- 工作溫度： -20°C 至 +60°C（具體工作環境溫度根據應用可能有所不同）。
- 濕度： 模塊可承受高達95%的濕度。
- 電源要求： 通常使用 24V DC 電源供電，但具體電壓值應參照產品規格書確認。
英文資料：
The Triconex 3624 is a digital output module in the Tricon series designed to support high reliability, real-time response industrial automation and safety instrumented systems (SIS). As a key component, it can perform output control of digital signals, ensuring that the system can accurately respond and control the process.
Main technical parameters:
Output type:
Digital output: Provides stable switch output, suitable for control needs of various devices.
Number of output channels: usually 8 or 16 channels, specific models may vary.
Output specifications:
Each output channel typically supports 24V DC relay output or transistor output, which can directly drive the load.
It has short-circuit protection, overload protection, and overvoltage protection functions, enhancing safety.
Redundant design:
This module supports hot swappable redundancy design to ensure that system operation is not affected in the event of a failure.
Dual power input: Provides higher reliability and avoids the impact on the system in the event of a single power failure.
Communication protocol:
Usually connected to the main control unit of the Triconex system through high-speed communication protocols (such as TCM, Triconex ControlNet, or other dedicated networks), ensuring high-speed and reliable data exchange.
Diagnostic function:
Self diagnosis: Built in self diagnosis mechanism, which can monitor the output status in real time and notify the control system when a fault occurs.
Alarm mechanism: If there is a malfunction in the module output, it can be reported in a timely manner to reduce system downtime.
Environmental and power requirements:
Working temperature:- 20 ° C to+60 ° C (specific working environment temperature may vary depending on the application).
Humidity: The module can withstand up to 95% humidity.
Power requirements: Typically, a 24V DC power supply is used for power supply, but the specific voltage value should be confirmed in accordance with the product specifications.
2.產 品 展 示
3.其他產品
4.其他英文產品
Radisys EPC-3307 processor board
ASEA 57360001-AN circuit board
Kollmorgen 6SM37M-6000 servo motor
| PMB33C-10114-02 | 07BA60R1 | P21NRXB-LNS-NS-05 |
| PMB33C-10114-01 | 70 BV 01b-E | N31HRHK-LNK-NS-00 |
| PMB33C-10114-00 | AMAT 0100-01341 | PXKB201 |
| PMB33C-10101-03 | AMAT 0110-02336 | 57160001-UZ DSDI 120 |
| PMB33C-10101-02 | IMBLK01 | 3BSE004985R1 DSRF 187 |
| PMB33C-10101-01 | 07BR60R1 | P21NSXS-LSS-NS-08 |
| PMB33C-10101-00 | 07NG60R1 | P22NRXA-LSN-NS-02 |
| PMB33C-10100-03 | 07ZB69R2 | P22NRFB-LNN-NS-00 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.jiangxidcs
